Stirrer Accessories
Chemglass Life Sciences Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 24/40 Inner Joint. Similar to CG-2070 but with a tooled lubricant cup at the top of the bearing to hold an increased amount of lubricant. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Button Style, for 2000 to 12000mL Flasks, 525mm OAL
Stirring Shaft, 10mm, Polished, Button Style, for 2000ml. to 12000ml. Flasks, 525mm OAL. A 10mm precision ground and polished stirrer shaft to fit CG-2076 and CG-2077 10mm bearings. Side button for attachment of CG-2080 or CG-2081 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2075.
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 19mm x 75mm Blade Fits 500mL-5L Flask, 24/40 Bearing, 10mm OD x 445mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 19mm x 75mm Blade Fits 500mL-5L Flask, 24/40 Bearing, 10mm OD x 445mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir™ stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.
Chemglass Life Sciences PEEK Compression Cap, 19mm
Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, PEEK (Polyetheretherketone) compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard taper inner joint allows easy and quick removal. Supplied complete with a Perfluoro o-ring on the body and a Viton o-ring on the bushing.
Chemglass Life Sciences 25.4mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud
25.4mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.PLEASE NOTE: OTHER THAN OUR CG-2097 PROCESS REACTOR STIRRER SHAFTS, CHEMGLASS 19MM OD STIRRER SHAFTS HAVE A REDUCED TOP DIAMETER OF 12.7MM. WHEN ORDERING A UNIVERSAL COUPLING FOR A CHEMGLASS 19MM OD STIRRER SHAFT, USE PART NUMBER CG-2046-03.
Chemglass Life Sciences Body Only, 24/40 PTFE Bearing, 10mm
Body Only, 24/40 PTFE Bearing, 10mm. Replacement part for CG2077H series of PTFE stirrer bearings.
Chemglass Life Sciences Agitator, PTFE, Four Blade, 8in Diameter, Fits 25.4mm Shaft Size, 60° Impeller Angle
Agitator, PTFE, Four Blade, 8in Diameter, Fits 25.4mm Shaft Size, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 25.4mm OD stirrer shaft CG-2097 and have 60¿ impeller angles. The 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Chemglass Life Sciences Agitator, PTFE, Four Blade, 6in Diameter, Fits 19mm Shaft Size, 60° Impeller Angle
Agitator, PTFE, Four Blade, 6in Diameter, Fits 19mm Shaft Size, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 19mm OD stirrer shaft CG-2097 and have 60¿ impeller angles. The 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Glass Agitator, Four-Blade, 460mm OAL, for 500mL Reactors, 67mm OD Agitator
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 400mm OAL, Agitator OD 42mm, for use with 100-250mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 5000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 5000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences 3/8" Upper Female Motor Adapter (Red)
3/8" Upper Female Motor Adapter (Red). Tru-Stirrer Shaft Coupling Replacement Component.
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 485mm OAL, 81mm OD Anchor Style Blade, Fits 500mL Reactors
Stirring Shaft, PTFE Covered SS, 485mm OAL, 81mm OD Anchor Style Blade, Fits 500mL Reactors
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 3000mL Flasks, 40/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 3000mL Flasks, 40/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask.Blades are perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences Coils, Reactor Capacity: 10L, Flange ID: 200mm, Tubing Diameter: 1/4"
Reactor Capacity: 10L, Flange ID: 200mm, Tubing Diameter: 1/4". For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 Stainless Steel tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides for excellent heat transfer and avoids the problems normally associated with heat-shrink PTFE tubing on copper tubing.
Chemglass Life Sciences 10mm Chem-Vac Stirrer Bearing, PTFE, 24/40 Joint Size
10mm Chem-Vac Stirrer Bearing, PTFE, 24/40 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.